Description
The signature product from Zermatt Arms, the TL3 Short Action Receiver is everything you need in a high-end rifle action. Each rifle receiver is machined from hardened 416 stainless steel and features an integral recoil lug, Savage small-shank thread tenon, floating, interchangeable bolt head, controlled-round feed action, spiral-fluted bolt, mechanical ejector and a bayonet-style firing-pin assembly. Available in 2 mag cut options for either AICS type or AW type magazines. The AICS cut will accept all AICS-pattern magazines loaded with rounds that have a COAL of up to 2.980. AW cut actions will also accept both AW and AICS-pattern magazines. Zermatt warns users that running AICS-magazines in an AW-cut receiver can cause feeding issues. If upward pressure is placed on an AICS-pattern mag in the receiver, the bolt may not be able to go forward. The Zermatt Arms TL3 Short Action Receiver come with a medium tang, which provides the same footprint profile as a Remington 700 action, so the TL3 should be able to drop into any standard 700-footprint chassis or stock with no inletting required.FFL RestrictionYou must be 18 years of age or older to purchase rifles and shotguns, and 21 or older to purchase handguns, receivers, frames, and suppressors. Minimum age requirements may vary by state. Check your state and local laws before ordering. It is your responsibility to fully understand the laws in your area and to ensure that possession of this item would not violate any applicable state or local laws. This product must be delivered to a Federal Firearms License holder.
